High Performance Anchor With Round Plate - Hot dip galvanized umbrella spike – NEWEAST YILONG

Ground screw for bumbersoll
Usage:As a foundation to install umbrella in the garden or somewhere else.
Material:Iron steel+hot dip galvanize,zinc coating more than 40μm
Redrawing tube and no any joint on the body make it stronger.
How to install it?
Use the deformed steel bars cross of the top hole,Then rotate the bar，then the spike can be drive into the earth.
It is not difficult to install with the sharp spike.
There have some different plastic clips can suit for different bumbersoll handle.
We supply different sizes for your choose.
Customer order size accept.
Send us email to get more informtions.
yilong@188.com

Many sizes for your choice.

Umbrella spike produced by iron steel,then hot dip galvanize,zinc coating around 40μm.The heavy zinc coating protect it not rust and use longer time.
Top part produced by tube,the umbrella handle can put into the tube.
Together with the spike,we supply plastic clips,There are many different size clips to suit for different umbrella handle.
Bottom part is steel bar welded with spiral to easy drive into the ground.
The steel bar is solid and strong.
You can drive it into ground by this deformed steel bar,The installation work is easy with this tool ,the sharp spike can help you too.

Diamter of tube:68mm
Length:560mm
Thickness:2.0mm

The umbrella spike is widely usage.
You can pre-buried in your garden,When you want to enjoy the outdoor air or BBQ,Take out the bumbersoll and insert into the spike.
When you store away the bumbersoll,You can cover it by the cap to avoid water come in.

If you need other size,PLS feel free to send email to yilong@188.com